ZyXEL Communications 4528F User Manual

Chapter 24 Multicast

XGS-4526/4528F/4728F User’s Guide

Click Advanced Applications > Multicast > Multicast Setting > IGMP 
Filtering Profile link to display the screen as shown. 

Figure 101   Advanced Application > Multicast > Multicast Setting > IGMP Filtering 

Profile 

The following table describes the labels in this screen. 

Table 65   Advanced Application > Multicast > Multicast Setting > IGMP Filtering 
Profile

Profile Name

Enter a descriptive name for the profile for identification purposes. 

To configure additional rule(s) for a profile that you have already added, 
enter the profile name and specify a different IP multicast address 
range. 

Start Address 

Type the starting multicast IP address for a range of multicast IP 
addresses that you want to belong to the IGMP filter profile. 

End Address 

Type the ending multicast IP address for a range of IP addresses that 
you want to belong to the IGMP filter profile.

If you want to add a single multicast IP address, enter it in both the 
Start Address and End Address fields.

Add

Click Add to save the profile to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Clear

Click Clear to clear the fields to the factory defaults.

Profile Name

This field displays the descriptive name of the profile.  

Start Address 

This field displays the start of the multicast address range. 

End Address

This field displays the end of the multicast address range.