ZyXEL Communications 4528F User Manual

 Chapter 28 VLAN Mapping

XGS-4526/4528F/4728F User’s Guide

Click the VLAN Mapping Configure link in the VLAN Mapping screen to display 
the screen as shown. Use this screen to enable and edit the VLAN mapping 
rule(s).

Figure 136   VLAN Mapping Configuration 

The following table describes the labels in this screen.  

Table 91   VLAN Mapping Configuration 

Active

Check this box to activate this rule.

Name

Enter a descriptive name (up to 32 printable ASCII characters) for 
identification purposes. 

Port

Type a port to be included in this rule.

VID

Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the 
packets and will be translated into the VID you specified in the 
Translated VID field. 

Translated VID Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in 

the packets will be translated. 

Priority

Select a priority level (from 0 to 7). This is the priority level that replaces 
the customer priority level in the tagged packets or adds to the untagged 
packets.

Add

Click Add to insert the entry in the summary table below and save your 
changes to the Switch’s run-time memory. The Switch loses these 
changes if it is turned off or loses power, so use the Save link on the top 
navigation panel to save your changes to the non-volatile memory when 
you are done configuring.

Cancel

Click Cancel to reset the fields to your previous configuration.

Index

This is the number of the VLAN mapping entry in the table.

Active

This shows whether this entry is activated or not.

Name

This is the descriptive name for this rule.