ZyXEL Communications 4528F User Manual

Chapter 41 DHCP

XGS-4526/4528F/4728F User’s Guide

• VLAN - The Switch is configured on a VLAN by VLAN basis. The Switch can be 

configured as a DHCP server for one VLAN and at the same time the Switch can 

be configured to relay DHCP requests for clients in another VLAN.

Click IP Application > DHCP in the navigation panel. The DHCP Status screen 
displays. 

Figure 185   IP Application > DHCP Status 

The following table describes the labels in this screen. 

Click IP Application > DHCP in the navigation panel and then click an existing 
index number of a DHCP server configuration to view the screen as shown. Use 

Table 130   IP Application > DHCP Status

Server Status

This section displays configuration settings related to the Switch’s DHCP 
server mode. 

Index

This is the index number. 

VID

This field displays the VLAN ID for which the Switch is a DHCP server.

Server Status

This field displays the starting DHCP client IP address. 

IP Pool Size

This field displays the number of IP addresses that can be assigned to 
clients. 

Relay Status

This section displays configuration settings related to the Switch’s DHCP 
relay mode. 

Relay Mode

This field displays:

• None - if the Switch is not configured as a DHCP relay agent.
• Global - if the Switch is configured as a DHCP relay agent only.
• VLAN - followed by a VLAN ID if it is configured as a relay agent for 

specific VLAN(s).