ZyXEL Communications 4528F User Manual
Chapter 5 Initial Setup Example
XGS-4526/4528F/4728F User’s Guide
61
3
Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to
configure port 1 to be a permanent member of the VLAN only.
configure port 1 to be a permanent member of the VLAN only.
4
To ensure that VLAN-unaware devices (such as computers and hubs) can receive
frames properly, clear the TX Tagging check box to set the Switch to remove
VLAN tags before sending.
frames properly, clear the TX Tagging check box to set the Switch to remove
VLAN tags before sending.
5
Click Add to save the settings to the run-time memory. Settings in the run-time
memory are lost when the Switch’s power is turned off.
memory are lost when the Switch’s power is turned off.
5.1.4 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that
the frames are forwarded to the VLAN group that the tag defines.
the frames are forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 1 so that any
untagged frames received on that port get sent to VLAN 2.
untagged frames received on that port get sent to VLAN 2.
Figure 26 Initial Setup Network Example: Port VID
1
Click Advanced Applications
and VLAN in the navigation
panel. Then click the VLAN Port
Setting link.
and VLAN in the navigation
panel. Then click the VLAN Port
Setting link.
2
Enter 2 in the PVID field for port
1 and click Apply to save your
changes back to the run-time
memory. Settings in the run-time
memory are lost when the
Switch’s power is turned off.
1 and click Apply to save your
changes back to the run-time
memory. Settings in the run-time
memory are lost when the
Switch’s power is turned off.
EXAMPLE