ZyXEL Communications 650 Series User Manual

Prestige 650 Series User’s Guide 

25-2 

 

Wireless LAN Setup 

 

 

 

 

 

 

 

 

 

The following table describes the fields in this menu. 

ESSID

 

The ESSID (Extended Service Set IDentifier) identifies the service set the 
wireless station is to connect to. Wireless stations associating to the Access 
Point must have the same ESSID. Enter a descriptive name (up to 32 
characters) for the wireless Service Set.

 

Hide ESSID  Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing 

beacon frame so a station cannot obtain the ESSID through passive 
scanning.  

Channel ID 

 

Press [SPACE BAR] to select a channel. This allows you to set the 
operating frequency/channel depending on your particular region. 

2412MHz 

RTS 
Threshold

 

RTS(Request To Send) threshold (number of bytes) enables RTS/CTS 
handshake. Data with its frame size larger than this value will perform the 
RTS/CTS handshake. Setting this attribute to be larger than the maximum 
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake. 
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a 
value between 0 and 2432. 

Frag. 
Threshold 

 

The threshold (number of bytes) for the fragmentation boundary for directed 
messages. It is the maximum data fragment size that can be sent. Enter a 
value between 256 and 2432.

 

2432 

 

Menu 3.5- Wireless LAN Setup 

 

ESSID= Wireless 
Hide ESSIS = No 

Channel ID= CH01 2412MHz 

RTS Threshold= 2432 

Frag. Threshold= 2432 

WEP= Disable 

     Default Key= N/A 
     Key1= N/A 

     Key2= N/A 

     Key3= N/A 

     Key4= N/A 

Edit MAC Address Filter= No 

 

Press ENTER to Confirm or ESC to Cancel: