Multi-Tech Systems 7500 User Manual
ION 7500 / ION 7600 User’s Guide
The Meter is Factory-Configured and Ready to Operate
Chapter 1 - Introduction
Page 17
Analog Inputs and Analog Outputs
The meter offers an optional Analog I/O expansion card with numerous options:
◆
four 0 to 1 mA analog inputs
◆
four 0 to 20 mA analog inputs
◆
four -1 to 1 mA analog outputs
◆
four 0 to 20 mA analog outputs
◆
four 0 to 20 mA analog inputs & four 0 to 20 mA outputs
◆
four 0 to 1 analog inputs and four -1 to 1 mA analog outputs
N
OTE
All options have an additional eight digital inputs on the card.
The Meter is Factory-Configured and Ready to Operate
Even though the meter is fully customizable, it is shipped from the factory with
many pre-configured functions. Once you have performed the installation and
basic setup, all of the basic measurements, energy calculations and recording
functions are ready to operate right out of the box. You may find that the factory
configuration aptly serves your purposes, allowing you to forego additional
configuration.
many pre-configured functions. Once you have performed the installation and
basic setup, all of the basic measurements, energy calculations and recording
functions are ready to operate right out of the box. You may find that the factory
configuration aptly serves your purposes, allowing you to forego additional
configuration.