RTS DKP 16 CLD User Manual

You can use only one (1) type of Frame connection to the Matrix at a time.

Plug the Power Cord (C) into the power connector KP 32 CLD.

If required, set the keypanel address.

Connect an RJ11 cable with RTS

 cabling (E) or RJ45 cable with RTS

 cabling (F) to the frame connector (see 

Figure 13).
OR
Connect a DB9 cable (G) to the DB9 frame connector (see Figure 13).

Using the KP 32 CLD and AZedit, configure your keypanel for operation. 

KP 32 CLD Installation