RTS DKP 16 CLD User Manual
62
Audio Options Menu, Headset
The Headset menu option is used to configure how the headset operates. When a GPI 32 CLD option card is installed, Front
and Rear options are displayed.
and Rear options are displayed.
You can configure the speaker with one of the following:
Always ON (default) - no matter what is selected, Always ON overrides the manual selection.
Disabled
Switched - when enabled, whichever mic is selected, the corresponding speaker/headphone is active.
NOTE:
Where the audio is heard is directly related to the state of the Hdst - Panel Mic. See “Reference View - KP 32
CLD (90007858000)” on page 6.
NOTE:
When using the DKP 16 CLD, Left and Right appear as options, instead of Front and Rear.
To configure the Headset, do the following:
1.
On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
The Top Level menu appears.
2.
Using the 3(
↑) or 6(↓), select Audio Options.
3.
Press the SEL button.
The Audio Options menu appears.
The Audio Options menu appears.
4.
Using the 3(
↑) or 6(↓), select Headset.
5.
Press the SEL button.
Front and Rear appear.
Front and Rear appear.
6.
Using the 3(
↑) or 6(↓), select either Front or Rear.
7.
Press the SEL button.
Always On, Disabled, and Switched appears.
Always On, Disabled, and Switched appears.
8.
Using the 3(
↑) or 6(↓), select the mode.
FIGURE 42.
Audio Options - Headset Front Rear Option
FIGURE 43.
Headset Always On, Disabled, and Switched