Multitech MT128ISA-UV User Manual

Your internal ISDN PC card is compatible with prevalent ISDN switch protocols.

It communicates using ISDN BRI (2B+D) service, which provides up to 128K bps

data communications.
This manual documents the following models:

• MT128ISA-SD for ST interface no POTS port

• MT128ISA-SV for ST interface with one POTS port

• MT128ISA-UD for U interface no POTS port

• MT128ISA-UV for U interface with with one POTS port

All of the current analog devices, including telephone set, G3 fax, answering ma-

chine, modem, and PBX trunk line, can be connected to the POTS port via an RJ-

11 jack in “V” models.
This owner’s manual will help you install, configure, and operate your TA.

Your internal ISDN PC card features include:
• D Channel protocols.  Including AT&T 5ESS, Nortel DMS-100, US NI-1 &

NI2, ETSI, Japan INS-64

• B Channel protocols.  Including HDLC, X.75, V.120, and voice (V models)
• ISDN BRI (2B+D) and analog ports.
• Supports Application Interfaces including WinISDN, CAPI 2.0, Windows

Comm (AT command/S-Registe/Result Codes) and NDISWAN Miniport.

• Automatic detection of incoming calls as voice or data  (V models).
• Supports Windows 3.1, Windows 95 (OSR-2), and Windows NT Multilink PPP

connection.

•  Supports Microsoft ISDN Accelerator Pack.
•  PnP compatibility with 16 bits address decoding.
• Ability to use the same communications software as analog modems
•  Provides On-line test and Diagnostics tools.