ZyXEL Communications 50 User Manual
ZyWALL 50 Internet Security Gateway
18-4
Firmware and Configuration File Maintenance
Figure 18-2 FTP Session Example
18.2.4 GUI-Based FTP Clients
The following table describes some of the commands that you may see in GUI-Based FTP clients.
Table 18-2 General Commands for GUI-Based FTP Clients
COMMAND DESCRIPTION
Host Address
Enter the address of the host server.
Login Type
Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type
Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory
Specify the default remote directory (path).
Initial Local Directory
Specify the default local directory (path).
18.2.5 TFTP and FTP over WAN Will Not Work When
• Telnet service is disabled in menu 24.11.
• A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block Telnet service.
• The IP address in the Secured Client IP field (menu 24.11) does not match the client IP address. If it
does not match, the ZyWALL will disconnect the Telnet session immediately.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit