ZyXEL Communications ZyXEL AG-220 User Manual

ZyXEL AG-220 User’s Guide

70

Chapter 4 Wireless Station Mode Configuration

Take the following steps to set up WPA, WPA2 or 802.1x security using PEAP in Windows 
Vista.

1 Either select the AP to which you want to connect in the Site Survey screen (see 

), or configure a profile in the normal way (see 

2 In the WPA, WPA2 or 802.1x security screen (see 

 and 

), select PEAP as the EAP Type. Note that the Login Name, 

Logon Domain, and Password fields are not available in the Vista utility, you will be 
able to enter them in the Vista Security screen below.

3 Click Next.
4 In the Summary screen that appears, click Save.
5 A message similar to the following appears in the bottom-right of your screen. Click the 

message.

Figure 45   Vista Security: Additional Information Required

6 The Enter Credentials screen displays. Enter your User name and Password for the 

network to which you want to connect.

Figure 46   Vista Security: Enter Credentials

Note: If you are not sure what to enter, contact your network administrator.

7 Click OK. The Enter Credentials screen disappears and the AG-220 tries to connect to 

the network. The ZyXEL utility’s Link Info screen displays, showing the connection 
status (see 

). If the Link Info screen displays an active 

connection, you have successfully completed the procedure.

Take the following steps to set up WPA, WPA2 or 802.1x security using TLS in Windows 
Vista.