Konica Minolta 211 User Manual
Network settings
7
IC-206
7-37
5
In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
SERVER ADDR.” is selected, and then press the [OK] key.
SERVER ADDR.” is selected, and then press the [OK] key.
6
Type in the IP address or host name for the LDAP server.
–
The host name can contain a maximum of 64 characters.
–
To specify a host name for the LDAP server, the DNS setting must
be specified.
be specified.
–
For the IP address or host name of the LDAP server, consult with
the network administrator.
the network administrator.
–
If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
erase it, and then type it in correctly.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
appears again.
Specifying the LDAP port number
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
PORT NO.” is selected, and then press the [OK] key.
PORT NO.” is selected, and then press the [OK] key.