Konica Minolta 211 User Manual

Network printing

IC-206

3-7

Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)

From the machine’s control panel, specify the IP address, subnet mask 
and default gateway. (Refer to “Specifying an IP address” on page 3-9.)

Print the settings information, and then check the settings. (Refer to 
“Printing the settings information” on page 3-13.)

Install the printer driver. Specify the network port when the driver is in-
stalled.

–

For details on specifying the network port, refer to “Connecting the 
computer and this machine over a network” on page 3-15.

–

For details on installing the PCL driver, refer to “Installing the printer 
driver by using the Add Printer Wizard” on page 2-15.

–

If the GDI driver is to be installed, refer to the User’s Guide for the 
GDI printer controller, included with this machine.