Konica Minolta 211 User Manual
Network printing
3
IC-206
3-21
Connecting the IPP printing NetWare server and this machine
Connecting the NetWare server and this machine
Specifying the NetWare 4.x/5.x/6 print server mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the print server system or category container, and then select
“Print service quick setup” from the tool menu.
“Print service quick setup” from the tool menu.
4
Type in the print server name, printer name, print queue name and vol-
ume name, select “Other/Unknown” as the printer type, and then save
the specified settings.
ume name, select “Other/Unknown” as the printer type, and then save
the specified settings.
–
For queue user privileges, the printer notification option, assign-
ment of multiple queues, and passwords, refer to the NetWare doc-
umentation, and specify settings as necessary.
ment of multiple queues, and passwords, refer to the NetWare doc-
umentation, and specify settings as necessary.
5
Start up PageScope Web Connection, click the Network tab in Admin-
istrator mode, select “NetWare Configuration”, and then specify the
following settings for this machine.
istrator mode, select “NetWare Configuration”, and then specify the
following settings for this machine.
–
For details on using PageScope Web Connection, refer to “Using
PageScope Web Connection” on page 11-1.
PageScope Web Connection” on page 11-1.
6
From the NetWare Server console, load MONITOR.NLM.
7
Select the connection settings, and check that the PServer you created
is listed in the active connections section.
is listed in the active connections section.
NetWare version
Protocol
Emulation
Service mode
NetWare 4.x
IPX
NDS / Bindery
Pserver / Nprinter
NetWare 5.x / 6
IPX
NDS / Bindery
Pserver / Nprinter
TCP/IP
NDPS(lpr)
Parameter
NDS
Bindery
NetWare Configuration*
Enable NetWare (Select the check box to enable it.)
Frame Type*
AutoDetect (Select the frame type according to the network en-
vironment.)
vironment.)
Print Server Name
Print server name created in step 4
NDS Context Name
Name of the context that con-
nects to PServer
nects to PServer
Not necessary to specify
Print Server Password
Specify only when setting from the NetWare Server.