Zoom CableModem User Manual

10

Zoom USB Cable Modem User’s Manual

5

When the Zoom Cable Modem Driver Installation screen
reappears, click the Close box     to exit.

6

Shut down your computer and complete the following steps to

connect the USB cable and finish the installation.

Note: The driver must be installed before you connect the USB

cable.

1

Connect the USB cable from your modem to your computer.

The USB light on the modem’s front panel will go on,

indicating that the modem and the computer’s data interface

are linked. If the light does not go on, make sure that the USB

cable is securely connected at both the modem and the

computer.

2

Restart the computer.

3

If prompted, insert your Windows operating system CD and

follow the instructions.

4

If prompted, restart your computer one more time. Then

configure your computer’s network settings as described

below.

Select your operating system:

•

 

For Windows 98/Me network settings, see page 11.

•

 

For Windows 2000 network settings, see page 16.