Multitech MT128ISA-SV User Manual

2.  WinISDN Interface.  The ISDN driver can transmit/receive data with applica-

tions through the standard WinISDN interface.  The following TCP/IP stacks

support the WinISDN interface.

•  NetManage’s Chameleon
•  FTP’s Explore
•  Frontier’s SuperHighway Access
Refer to the proper TCP/IP stack document respective to your setup dial-up envi-

ronment for WAN and LAN.  We recommend NetManage’s Internet Chameleon

(version 4.5 or later) for compatibility using both PPP and Multilink PPP.
3. CAPI Interface.  Applications can also access the ISDN card for up to 128K

data transmission and receiving through the standard CAPI 2.0 (or later) inter-

face.

•  Removing ISDNLINK for Windows 3.1

To remove the ISDN driver from your Windows 3.1, click the unInstallSHIELD

icon (see Figure 2-5).

Read the following Windows 95 installation steps and setup procedures for NDIS-

WAN Miniport adapters and virtual modems.
1.  After you have installed the internal PC terminal adapter, switch computer

power on and allow Windows 95 to startup.  When the system starts it should

auto-detect a new PnP card and request driver installation.  Insert the ISDN

driver diskette/CD into appropriate disk drive, select the ISDN100.INF file

from the installation diskette/CD.  Windows 95 automatically processes the

necessary installation steps.

2.  With Windows 95 you can set up (or change) the ISDN configuration of Switch

Type, values of MSN and SPIDs by:

Double Clicking on Settings»Control Panel»System»Device Manager»ISDN

LinkCard»ISDN MT128ISA Adapter»ISDN MT128ISA Adapter

Properties»Settings.