Multitech MTPSR1-120 User Manual

Cabling your ProxyServer involves making the proper Power, Command Port, and two Ethernet
connections. An optional WAN connection is provided to connect to an external WAN device.
Figure 2-4 shows the back panel connectors and the associated cable connections, and the table
that follows details the procedures for connecting the cables to your ProxyServer.

Power
Connection

PC
Connection

Secured
LAN

Internet
LAN

WAN
Connection

2

ETHERNET

COMMAND

10BASET

10BASET

ON

OFF

1

RS232/V.35

POWER

1.

Connect one end of the power supply to a live AC outlet and connect the other end to the
ProxyServer as shown in Figure 2-4. The power connector is a 6-pin circular DIN
connector.

2.

Connect the ProxyServer to a PC by using the short RJ-45 to DB-25 (female) cable
provided in your unit. Plug the RJ-45 end of the cable into the Command port of the
ProxyServer and the other end into the RS-232 cable from the PC serial port. See Figure
2-4.

3.

To connect your secure (private) LAN, connect one end of an RJ-45 (UTP) cable to the
LAN 1 connector on the back of the ProxyServer. Connect the other end of the cable to
your private LAN.

4.

To connect a cable modem, DSL modem, or your Internet (public) LAN, connect one end
of an RJ-45 (UTP) cable to the LAN 2 connector on the back of the ProxyServer.
Proceed to step 6.