Adtran 810 Plus User Manual
Chapter 9. Dial Plan Terminal Menu
9-14
ATLAS 810
PLUS
User Manual
61200266L1-1
»» DS0s Available
Read security: 5
Indicates which DS0s of the T1 have been defined in this switched endpoint
(indicated by “! “), in another switched endpoint (indicated by “s”), or in a
dedicated map (indicated by “n”). The following symbols may display in
this field:
Indicates which DS0s of the T1 have been defined in this switched endpoint
(indicated by “! “), in another switched endpoint (indicated by “s”), or in a
dedicated map (indicated by “n”). The following symbols may display in
this field:
»» Trunk Type (Voice/
SW56)
Write security: 3; Read security: 5
Use if the incoming service on this trunk is Switched 56 digital instead of
standard voice.
Use if the incoming service on this trunk is Switched 56 digital instead of
standard voice.
»» Signaling Method
Write security: 3; Read security: 5
Defines to ATLAS the type of signaling to be used across this trunk. The sig-
naling selected needs to match the signaling being provided by the Net-
work (PSTN). The available options include E&M Immediate, E&M Wink,
Loop Start, and Ground Start.
Defines to ATLAS the type of signaling to be used across this trunk. The sig-
naling selected needs to match the signaling being provided by the Net-
work (PSTN). The available options include E&M Immediate, E&M Wink,
Loop Start, and Ground Start.
»» Direct Inward Dialing
Write security: 3; Read security: 5
Defines to ATLAS whether DID is being used by the Network. If DID is
Enabled, then the following information must be defined:
Defines to ATLAS whether DID is being used by the Network. If DID is
Enabled, then the following information must be defined:
DID Digits
Transferred
Transferred
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS from the Network if DID is
used.
Defines the number of digits sent to ATLAS from the Network if DID is
used.
DID Prefix
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as a part of the
DID number. ATLAS uses the combination of prefix and DID number to
determine the User endpoint that should receive the incoming call. This
option only displays if Direct Inward Dialing (DID) is set to Enabled. If DID
is Disabled, then you must define the trunk number.
Defines to ATLAS the prefix digits which are not received as a part of the
DID number. ATLAS uses the combination of prefix and DID number to
determine the User endpoint that should receive the incoming call. This
option only displays if Direct Inward Dialing (DID) is set to Enabled. If DID
is Disabled, then you must define the trunk number.
digits 0—9
This DS0 is available. The digit that displays in this field rep-
resents the last digit of the DS0 number.
resents the last digit of the DS0 number.
*
This port is requesting this DS0 for this connection, but the
DS0 is not yet activated.
DS0 is not yet activated.
!
This DS0 is used by this port in this connection and is activat-
ed.
ed.
s
This DS0 is used in the switched Dial Plan.
S
This DS0 is used in the switched Dial Plan and conflicts with
this connection.
this connection.
n
This DS0 is already used in this dedicated map.
N
This DS0 is already used in this dedicated map and conflicts
with this connection.
with this connection.