Adtran MX2800 M13 User Manual
MX2800 M13 Multiplexer User Manual
Transaction Language 1 (TL1), Section 9
61200290L1-1G
9-17
5. TL1 ERROR CODES
When the MX2800 denies a received TL1 command, the Output Response message has an associated four
letter error code indicating the reason for denial.
letter error code indicating the reason for denial.
TL1 Editing
TL1 editing commands allow the MX2800 to be provisioned through a TL1 session rather than through the
menu system that is accessed using a VT100 terminal emulator. User account information must be provi-
sioned through a console menu session or TL1 session prior to initiating a TL1 session. Once a TL1
session has been initiated using the ACT-USER command, see
menu system that is accessed using a VT100 terminal emulator. User account information must be provi-
sioned through a console menu session or TL1 session prior to initiating a TL1 session. Once a TL1
session has been initiated using the ACT-USER command, see
on page 9-6, the TL1 editing
commands may be used. The standard format for an edit command is as follows:
ED-rr:<tid>:<aid>:<ctag>:::<keyword>=<value>;
The parameter descriptions are as follows:
• rr is T1, T2, T3, or EQPT
• <tid> is the Target Identifier
• <aid> is the Access Identifier
• <ctag> is a 1-to-6 character correlation tag (echoed in response)
• <keyword> is one of the entries from the data dictionaries in
• <value> is one of the enumerated types in the data dictionaries, an integer, or Y/N, depending on the
TYPE.
Table 9-5. TL1 Error Codes
Error Code
Description
ICNV
Input, Command Not Valid
IDRG
Input, Date Range
IIAC
Input, Invalid Access Identifier
IITA
Input, Invalid Target Identifier
IPNV
Input, Parameter Not Valid
PIUI
Privilege, Input User Not Valid
PLNA
Privilege, Login Not Active or Insufficient Privileges
SROF
Status, Requested Operation Failed
SSRE
Status, System Resources Exceeded