Adtran MX2800 M13 User Manual
MX2800 M13 Multiplexer User Manual
Product Overview, Section 1
61200290L1-1G
1-3
Agent
The agent is a control program that resides in every network device. This program responds to queries and
commands from the network manager, returns requested information or invokes configuration changes
initiated by the manager, and sends unsolicited traps to the manager.
commands from the network manager, returns requested information or invokes configuration changes
initiated by the manager, and sends unsolicited traps to the manager.
MIB
An MIB is an industry standard presentation of all status and configuration parameters supported by a
network device.
network device.
5. TELNET
Telnet provides a password protected, remote login facility to the MX2800 that allows a remote user to
control the MX2800 through the terminal menus. Only one Telnet menu session may be active at a time.
control the MX2800 through the terminal menus. Only one Telnet menu session may be active at a time.
6. TL1
Transaction Language 1 (TL1) is an ASCII-based language that supports both command-response and
autonomous (NE) message generation. Commonly, TL1 is used over an X.25 packet network but is
completely independent of any physical layer protocols. For the MX2800, TL1 is implemented as a Telnet
session running over Ethernet or PPP. Currently, up to eight TL1 Telnet connections can be active at a time.
autonomous (NE) message generation. Commonly, TL1 is used over an X.25 packet network but is
completely independent of any physical layer protocols. For the MX2800, TL1 is implemented as a Telnet
session running over Ethernet or PPP. Currently, up to eight TL1 Telnet connections can be active at a time.
7. AVAILABLE OPTIONS
The following optional equipment is available for use with the MX2800. Contact a local distributor or the
ADTRAN Sales Department for more information. Refer to
ADTRAN Sales Department for more information. Refer to
for contact information.
Breakout Panel (P/N 1200291L1)
The optional breakout panel connects to the MX2800 and provides 28 RJ connectors for the individual
T1s/E1s. Shipment includes two six-foot, 64-pin to 64-pin amphenol cables which allow direct cabling to
the MX2800. Refer to
T1s/E1s. Shipment includes two six-foot, 64-pin to 64-pin amphenol cables which allow direct cabling to
the MX2800. Refer to
on page 2-5 for more information.
E1 Patch Panel (P/N 1200291L5)
The optional E1 patch panel connects to the MX2800 and provides 28 pairs of BNC connectors for E1
deployment (21 of which are used for E1 deployment). See
deployment (21 of which are used for E1 deployment). See