Adtran MX2800 M13 User Manual

MX2800 M13 Multiplexer User Manual

Installation and Operation, Section 2

61200290L1-1G

    2-15

The Logout selection ends the terminal session and logs out of the system. A valid username and password 
are required before a new session can begin. The unit will also log out of a terminal session automatically 
if the session remains inactive for a certain period of time. For more information, see the section 

The privilege level of the currently active terminal session is displayed in this field.

The 

 (alarm cut off) buttons turn off an active audible alarm. Since the buttons are recessed, use a pen 

or other pointed instrument to press them. Once an 

 button deactivates an alarm, the alarm remains 

disabled until the condition has cleared. 

Alarms can also be turned off remotely by using a selection found in the 

Status

 menu. For more 

information, refer to 

The MX2800 has LED status indicators for the power supplies, the DS3 state, the controller cards, and the 
individual T1s/E1s. These LEDs are identified below:

The 

 LED is active when the unit is on and receiving full power. The 

 LED is active when the 

power supply is failing or is providing low power and needs to be checked.

The 

 LEDs apply to the two controller cards. The LEDs provided are 

 (active), 

, 

 

(alarm), and 

 (performance). Various conditions are indicated by the state of the LED (its color and 

whether it blinks, alternates color, or is on solid). The condition descriptions vary depending on whether 
the LED represents the active controller card or the controller card on standby. The following tables 
provide LED definitions for the active cards (see 

on page 2-16) and T1/E1 cards (see 

on page 2-17).