Adtran MX2800 M13 User Manual

4-4    

61200290L1-1G

Section 4, Status

MX2800 M13 Multiplexer User Manual

This field indicates which types of power supplies are installed (AC or DC) in Card A and Card B and 
gives their current state. See 

These fields display information regarding the two controller cards. The following sections describe the 
system state fields in detail.

This field displays what type (if any) of system alarm is currently recognized by the unit. The condition is 
displayed until it clears up, with the exception of the Switched condition (which is cleared manually) and 
the Excessive Switches (which is cleared when Protection Switch alarms counts are cleared). For more 
information, refer to 

on page 5-14.

To clear the 

Switched

 condition, select Acknowledge Alarms (ACO) 

or push the 

 button on the front 

panel. For more information, refer to 

on page 2-15 and 

4-6 in this section. Possible alarm types are listed in 

.

Normal

The power supply is fully operational.

Error

The controller card cannot communicate with the power supply.

Power Low

The power supply output level is abnormally low.

Power Fail

The power supply input power is lost.

Charger Fail

The battery backup charger has failed or has lost its AC input.

Battery Low

The battery backup has reached an insufficient energy level to power the unit.

Temp High

The power supply card temperature is abnormally high.

Temp Critical

The power supply card temperature is so high that it is approaching shut off.

Supply Failure

A power supply card has failed.

Card Failure

A controller card is not passing data.

Excessive Switches

The Max Switching Threshold has been exceeded. Refer to 

Switched

A card switch has occurred.