Adtran T3SU 300 User Manual
Chapter 3. Configuration
61200217L1-1
T3SU 300 User Manual
3-19
Unit ID
Enter a name to identify the unit for management purposes.
Terminal Timeout
Set the amount of time the terminal or TELNET session can remain
inactive before requiring re-entry of the password for access. This
option can be disabled or set for 1 minute, 5 minutes, 15 minutes, 60
minutes, or one day.
inactive before requiring re-entry of the password for access. This
option can be disabled or set for 1 minute, 5 minutes, 15 minutes, 60
minutes, or one day.
Date/Time
Enter date and time information. Enter the time in military time
(separated by colons). Enter the month, date, and year (separated
by forward slashes). View this information in the
(separated by colons). Enter the month, date, and year (separated
by forward slashes). View this information in the
S
TATISTICS
menus.
Alarm Relay
Enable if the alarm terminal block (located on the rear of the unit) is
connected to an audible alarm. If enabled, the alarm circuit is
activated when a network alarm occurs.
connected to an audible alarm. If enabled, the alarm circuit is
activated when a network alarm occurs.
Dialup Options
Configure the dialup capabilities of the T3SU 300. For product
version 1200217L1, this option is only available if a dialup selection
was made for the
version 1200217L1, this option is only available if a dialup selection
was made for the
A
UXILIARY
P
ORT
M
ODE
For product version 1200217L2, this option is always available. See
Figure 3-10. Descriptions of the individual fields of this menu
follow the figure.
Figure 3-10. Descriptions of the individual fields of this menu
follow the figure.