Adtran TSU LT Leaflet
TSU LT
P/N 1202060L1
For more detailed documentation, visit us online at
Quick Start Guide, 61202060L1-13A, September 2001
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Copyright
2001 ADTRAN, All Rights Reserved
N
ETWORK
C
ONNECTION
P
INOUT
Pin
Name
Description
1
R1 RXDATA
Receive data from the Network - Ring
2
T1 RXDATA
Receive data from the Network - Tip
3, 6, 7, 8
UNUSED
n/a
4
R TXDATA
Transmit data towards the Network - Ring
5
T TXDATA
Transmit data towards the Network - Tip
VT 100 Terminal or device running
SLIP or async PPP protocol.
SLIP or async PPP protocol.
Network
T1
NETWORK
IN OUT MON
TEST JACKS
CONTROL
CHAIN IN CHAIN OUT
V.35 NX56/64
OFF
ON 115VAC/60HZ
.15A
I
NSTALLATION
I
NFORMATION
•
An eight-position modular jack (labeled NETWORK) is provided to
connect to the network T1 circuit. The pinout is provided on this Quick
Start Guide. See
connect to the network T1 circuit. The pinout is provided on this Quick
Start Guide. See
Chapter 2, Installation, of the TSU LT User Manual for
more information.
•
The rear panel contains a single V.35 interface for connecting to DTE
equipment. The pinout for this interface is located in
equipment. The pinout for this interface is located in
Appendix C of the
TSU LT User Manual.
•
When shipped from the factory, the TSU LT is uninitialized and set to
factory default conditions. At the first application of power, the unit will
automatically execute self-tests followed by an initialization sequence.
factory default conditions. At the first application of power, the unit will
automatically execute self-tests followed by an initialization sequence.
•
The TSU LT can be configured and controlled using the local front panel
of the unit or from ADTRAN’s PC Control Program, T-WATCH. A limited
menu tree is provided on the back of this sheet. For more detailed menu
information, refer to the TSU User Manual.
of the unit or from ADTRAN’s PC Control Program, T-WATCH. A limited
menu tree is provided on the back of this sheet. For more detailed menu
information, refer to the TSU User Manual.
•
Additional information can be found on the product CD which contains
the TSU LT User Manual, FAQs, Data Sheets, Applications, and White
Papers.
the TSU LT User Manual, FAQs, Data Sheets, Applications, and White
Papers.
R
EAR
P
ANEL
D
ESCRIPTIONS
Network Connector
Connection to T1 circuit
Test Interface
Bantam jacks provided for monitoring and testing
Control In/Out
Connection to a VT100 terminal
V.35 Connector
High-speed DTE interface
Power Switch
Turns power to the TSU on or off
115 VAC Connection
Power cord connection for a reliably grounded
115 VAC, 60 Hz power source
115 VAC, 60 Hz power source