Adtran P/N 1204011L1 Leaflet
DSU IV ESP DATA SERVICE UNIT
P/N 1204011L1
Quick Start Guide, 61204011L1-13A, June 2001
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Copyright
2001 ADTRAN, All Rights Reserved
10BaseT
LAN Card
LAN Card
VT 100 Terminal or device running
SLIP or async PPP protocol.
SLIP or async PPP protocol.
I
NSTALLATION
I
NFORMATION
•
An 8-pin Telco jack, a control port, a captive power cord and a power
switch are also located on the rear panel. See Rear Panel in Chapter 3,
of the DSU IV ESP User Manual for more information.
switch are also located on the rear panel. See Rear Panel in Chapter 3,
of the DSU IV ESP User Manual for more information.
•
The rear panel contains two DTE connectors which provide V.35 or
EIA-232 interfaces. The configuration settings are found in Chapter 6 of
the DSU IV ESP User Manual.
EIA-232 interfaces. The configuration settings are found in Chapter 6 of
the DSU IV ESP User Manual.
•
The DSU IV ESP rear panel has two card slots for the installation of dial
backup and ethernet cards. See DBU and Ethernet Card Slots in
Chapter 3 of the DSU IV ESP User Manual for instructions on inserting
these cards.
backup and ethernet cards. See DBU and Ethernet Card Slots in
Chapter 3 of the DSU IV ESP User Manual for instructions on inserting
these cards.
•
Pinouts for connectors are listed in Appendix A, Pinouts, in the DSU IV
ESP User Manual.
ESP User Manual.
•
Additional specific information can be found on the product CD which
contains the DSU IV ESP User Manual, FAQs, Data Sheets,
Applications, and White Papers.
contains the DSU IV ESP User Manual, FAQs, Data Sheets,
Applications, and White Papers.
R
EAR
P
ANEL
D
ESCRIPTIONS
DBU Interface
ESP DBU card slot
LAN Interface
ESP Ethernet card slot
Telco Connection
Connection to dedicated circuit (DDS network)
EIA-232 Connector
Connection to a DTE interface
Control
Connection to a VT 100 terminal or a device
running SLIP or async PPP protocol
running SLIP or async PPP protocol
V.35 Connector
High-speed DTE interface
Power Switch
Turns power on or off
115 VAC Connection
Power cord connection