Acer 08P4100 User Manual

NetWare

Manual No. 775079

2-9

1. The appropriate drivers should be loaded before trying to access the 

non-disk devices. 

2. Load the following drivers to use a CD-ROM under NetWare 5.0 

(cdrom is supplied by Novell):

☛

mdac.ham and scsicd.cdm are usually loaded in the 
startup.ncf file. 

: load mdac.ham

: load scsicd.cdm

: load cdrom

After the CD-ROM is mounted, the volume on the CD-ROM can be 
mapped from any workstation and accessed.

If NetWare 5.0 is already installed and you wish to add a Mylex Disk Array 
Controller later, the controller will be a secondary (non-bootable) controller. 
After installing the controller hardware and configuring a disk array, follow 
the procedure below to add the necessary controller drivers.

1. Copy NWASPI.CDM (for GAM support). 

• Copy C:\NWSERVER\DRIVERS\NWASPI.CDM to the directory 

named, C:\NWSERVER.

• In the C:\NWSERVER\STARTUP.NCF file add LOAD 

NWASPI.CDM with the other LOAD XXXX.CDM

2. With NetWare Server 5.0 loaded and running, load the NetWare 

program by typing the following at the console prompt:

and press <Enter>.

3. Choose “Driver Options” in the Installation Options menu.

4. Choose “Configure disk and storage device drivers” in the Driver 

Options menu.

5. Choose “Select an additional driver” in the Additional Driver Actions 

menu.