Allied Telesis AT-2973T User Manual

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide

61

6. Create the appropriate Autoexec.bat file in drive A for the chosen 

protocol as shown:

Here is an example of the TCP/IP autoexec.bat file:

path=a:\net
a:\net\net initialize
a:\net\netbind.com
a:\net\umb.com
a:\net\tcptsr.exe
a:\net\tinyrfc.exe
a:\net\nmtsr.exe
a:\net\emsbfr.exe
a:\net\net start basic
net use z: \\SERVERNAME\SHARENAME

Here is an example of the NetBEUI autoexec.bat file:

SET PATH=A:\NET
A:\NET\NET START BASIC

net use z: \\SERVERNAME\SHARENAME

7. Create a Config.sys file on the startup disk in drive A as shown: 

files=30
device=a:\net\ifshlp.sys
lastdrive=z

To install the DOS NDIS2 Driver Software on the hard disk, do the 
following:

1. Verify that the system has Microsoft LAN Manager 2.2 installed, with a 

protocol such as NetBEUI configured. 

2. Create a folder on your hard disk to store the NDIS 2.01 driver. 

Example: C:\LANMAN 

3. Copy the BXND20X.dos file to this folder. 

4. Edit the Config.sys file by adding the following lines: 

DEVICE = C:\LANMAN\PROTMAN.DOS 
DEVICE = C:\LANMAN\BXND20X.DOS
DEVICE = C:\LANMAN\NETBEUI.DOS