Allied Telesis AT-MC602 User Manual
AT-MC601 and AT-MC602 Installation and User’s Guide
33
3. Next, connect a telephone line cable from the VDSL Line port to the
wall/interior telephone line, as shown in Figure 17, so that the
Provider unit can communicate with the Subscriber unit.
Provider unit can communicate with the Subscriber unit.
Figure 17 VDSL Line to Wall/Interior Phone Line
Note
The procedure for connecting the management cable is described
in ”Cabling Preparations” on page 36.
in ”Cabling Preparations” on page 36.
Powering On
the Provider
Unit
Powering on the AT-MC602 Provider Unit requires that the host
equipment, AT-MCR12 rackmount chassis, is powered on as well. For
detailed information on how to power on the AT-MCR12 unit, refer to
the AT-MCR12 Media Converter Rackmount Chassis Installation Manual.
equipment, AT-MCR12 rackmount chassis, is powered on as well. For
detailed information on how to power on the AT-MCR12 unit, refer to
the AT-MCR12 Media Converter Rackmount Chassis Installation Manual.
MCR12
LINE
10Base
T
/
100Base
TX
LINK
AC
T
PWR
ERR
LINK
MGMT
AT
-MC602
VDSL EXTENDED ETHERNET
PSTN
LINE
10BaseT/
100BaseT
X
PSTN
LINK
ACT
PWR
ERR
LINK
MGM
T
AT-MC601
VDSL EXTENDED ETHERNET
Wall/Interior Phone Line