Adtran 1000R Series User Manual
Command Reference Guide
IKE Policy Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1260
IKE P
OLICY
C
OMMAND
S
ET
To activate the IKE Policy mode, enter the crypto ike policy command at the Global Configuration mode
prompt. For example:
prompt. For example:
>enable
#configure terminal
(config)#crypto ike policy 1
(config-ike)#
#configure terminal
(config)#crypto ike policy 1
(config-ike)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
of this guide. For more information, refer to the sections listed below:
All other commands for this command set are described in this section in alphabetical order.
For VPN configuration example scripts, refer to the technical support note
Configuring VPN located on the ADTRAN OS Documentation CD provided with your
unit.
Configuring VPN located on the ADTRAN OS Documentation CD provided with your
unit.