Adtran 1000R Series User Manual
Command Reference Guide
BGP Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1276
BGP C
ONFIGURATION
C
OMMAND
S
ET
To activate the BGP Configuration mode, enter the router bgp command at the Global Configuration
mode prompt. For example:
mode prompt. For example:
>enable
#configure terminal
(config)#router bgp 1
(config-bgp)#
#configure terminal
(config)#router bgp 1
(config-bgp)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
of this guide. For more information, refer to the sections listed below:
All other commands for this command set are described in this section in alphabetical order.