Adtran 1000R Series User Manual
Command Reference Guide
Router (OSPF) Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1315
timers spf <delay> <hold>
Use the timers spf command to configure the shortest path first (SPF) calculation and hold intervals.
Syntax Description
<delay>
Specifies the time in seconds between OSPF’s receipt of topology changes and
the beginning of SPF calculations.
the beginning of SPF calculations.
<hold>
Specifies the time in seconds between consecutive SPF calculations.
Range: 10 to 1800 seconds.
Range: 10 to 1800 seconds.
Default Values
<delay>
5 seconds
<hold>
10 seconds
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Series units.
Command History
Release 3.1
Command was introduced.
Usage Examples
The following example defines a delay of 10 seconds and a hold-time of 30 seconds:
(config)#router ospf
(config-ospf)#timers spf 10 30