Adtran 1000R Series User Manual
Command Reference Guide
DDS Interface Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
578
DDS I
NTERFACE
C
ONFIGURATION
C
OMMAND
S
ET
To activate the DDS Interface Configuration mode, enter the interface dds command at the Global
Configuration mode prompt. For example:
Configuration mode prompt. For example:
>enable
#configure terminal
(config)#interface dds 1/1
(config-dds 1/1)#
#configure terminal
(config)#interface dds 1/1
(config-dds 1/1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
of this guide. For more information, refer to the sections listed below:
All other commands for this command set are described in this section in alphabetical order.