Adtran 1000R Series User Manual

Command Reference Guide

61200510L1-35E

Copyright © 2005 ADTRAN

613

There are four types of Ethernet interfaces associated with the AOS:

•

Basic Ethernet interfaces (e.g., eth 0/1)

•

Gigabit Ethernet interfaces (e.g., giga-eth 0/3)

•

Ethernet sub-interfaces associated with a VLAN (e.g., eth 0/1.1)

•

Ethernet interface range (e.g., eth 0/1, 0/8)

To activate the basic Ethernet Interface Configuration mode, enter the interface ethernet command at the 
Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface ethernet 0/1

(config-eth 0/1)#

To activate the Gigabit Ethernet Interface Configuration mode, enter the interface gigabit-ethernet 

command at the Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface gigabit-ethernet 0/3

(config-giga-eth 0/3)#

To activate the Ethernet Sub-Interface Configuration mode, enter the interface ethernet command at the 

Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface ethernet 0/1.1

(config-eth 0/1.1)#

To activate the Ethernet Configuration mode for a range of Ethernet interfaces, enter the interface range 
command at the Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface range ethernet 0/1, 0/8

(config-eth 0/1, 0/8)#