Actiontec electronic GT701R User Manual

Actiontec USB/Ethernet DSL Modem User Manual

Chapter 6 Configuring Advanced Settings

RFC 1483 via Static IP

Select this option if the

ISP

service is configured to use

RFC

1483 using a static

address, which causes the

address and routing information to terminate at

the Modem, as opposed to the

address and routing information being bridged

to terminate at the computer. This allows the use of the router capabilities for
the Local Area Network (

LAN

). Enter the

, subnet mask, and default gateway

addresses provided by the

ISP

in the appropriate text boxes,.

☞

Note: Contact the

ISP

if unsure of the proper configuration.

Encapsulation

If the Modem is configured to obtain an

address through

DHCP

or to specify a

static

address, select the appropriate encapsulation option used by the ISP (

RFC

1483

Bridged or

RFC

1483

Routed).

☞

Note: Contact the

ISP

if unsure of the proper configuration.

For more information about setting up the Modem to use a static

address, see

chapter 4, “Setting Up Static

Addresses,” on page 15.