Actiontec electronic GT701R User Manual

Page of 113
42
Actiontec USB/Ethernet DSL Modem User Manual
43
Chapter 6  Configuring Advanced Settings
Remote Management/Telnet
Selecting Remote Management in the Advanced Setup tab generates the “Remote 
Management/Telnet” screen. Remote Management allows access to the Modem 
through the Internet via another computer. Actiontec recommends leaving the 
Remote Management and Remote Telnet Off (the factory default setting).
To access the Modem from the Internet, activate Remote Management by enter-
ing the Admin User Name and Password in the appropriate text boxes, selecting 
On next to “Remote Management,” and writing down the 
WAN IP
 address of the 
Modem (see “
WAN IP
 Address”). On a computer outside of the network, open a 
Web browser and enter the Modem’s 
WAN IP
 address in the address text box. The 
Modem’s Home screen (or a password prompt, if a password has been set) appears 
in the browser window.
 Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, see “Changing the User 
Name and Password)” on page 15.
To access the Modem via Telnet, activate Remote Telnet by selecting On next to 
“Remote Telnet.”
Telnet Timeout Setting
If Remote Telnet is activated in the Remote Management/Telnet screen, select Telnet 
Timeout Settings to generate the “Telnet Timeout Setting” screen. Here, select the 
amount of idle time before a Telnet session is automatically disconnected.