Actiontec electronic NS100-300 User Manual
26
Actiontec Network Attached Storage Device User Manual
27
Chapter 3 Using the Administrative Utility
Enable FTP Server
If this option is enabled, users can upload and download files via
FTP
(file transfer
protocol).
Allow anonymous FTP login (“guest” right)
The
FTP
server prompts for a user name and password when clients attempt to
connect. If this option is enabled, users will be able to enter “anonymous” as the
user name, and anything as the password. If this option is disabled, users must pro-
vide their correct user name and password.
user name, and anything as the password. If this option is disabled, users must pro-
vide their correct user name and password.
Enable UPnP Support
If enabled, the
NAS
Device will broadcast its availability. On systems which support
UP
n
P
(e.g., Windows Me,
XP
), an icon for the
NAS
Device will be automatically
generated.
Enable Print Icon
If enabled, the
NAS
Device places a printer icon for its print server in all print dia-
log boxes.
Port Number For HTTP…
This port number is used for Web browser connections to the
NAS
Device. The
default port is 80, as used by Web servers. If this is changed, use a number greater
than 1024 (8080 is often used). Also, if the port is not 80, specify the port in the
Web browser, in order to connect. To do this, add a “:” and the port number after
the address: e.g.,
than 1024 (8080 is often used). Also, if the port is not 80, specify the port in the
Web browser, in order to connect. To do this, add a “:” and the port number after
the address: e.g.,
http://192.168.0.100:8080
This example assumes the Device’s
IP
address is 192.168.0.100, and the port num-
ber is 8080.
Restore Default Config Button
Click this button to restore all settings on the
NAS
Device to factory defaults. Data
stored on the
NAS
Device will not be affected