D-Link DGL-4500 User Manual

Section - Configuration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your
ISP (Internet Service Provider.)

Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
specific ISP. 1500 is the default MTU.

The default MAC Address is set to the Internet port’s

physical interface MAC address on the Broadband

Router. It is not recommended that you change the

default MAC address unless required by your ISP.

You can use the

Clone.Your.PC’s.MAC.Address

button to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Internet Setup

Static (assigned by ISP)

Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.