D-Link 150 Easy Router User Manual

D-Link GO-RT-N150 User Manual

Section 3 - Configuration

Select PPPoE (Username/Password) from the

drop-down menu.

Select Static if your ISP assigned you the IP

address, subnet mask, gateway, and DNS server

addresses. In most cases, select Dynamic.

Enter the IP address (Static PPPoE only).

Enter your PPPoE user name.

Enter your PPPoE password and then retype the

password in the next box.

Enter the ISP Service Name (optional).

Select either Always-on, On-Demand, or

Manual.

Enter a maximum idle time during which the

Internet connection is maintained during

inactivity. To disable this feature, enable Auto-

reconnect.

Enter the Primary and Secondary DNS Server

Addresses (Static PPPoE only).

You may need to change the Maximum

My Internet

Connection:

Address Mode:

IP Address:

User Name:

Password:

Service Name:

Reconnection

Mode:

Maximum Idle

Time:

DNS Addresses:

PPPoE (DSL)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a

username and password. This option is typically used for DSL services. Make sure you remove any PPPoE software from your

computer. The software is no longer needed and will not work through a router.