Linksys Wireless-B Leaflet

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

1

2

A

Attach the Bridge’s antenna.

B

Plug the included Ethernet 

network cable into the LAN port 

on the back panel of the 

Bridge.

C

The X-II (MDI/MDI-X) slide switch 

offers a choice between two 

settings. Slide the X-II switch to 

the X position if you are 

connecting the Bridge to a 

PC’s network adapter. Slide the 

X-II switch to the II position if 

you are connecting the Bridge 

to a hub or switch.

D

Plug the other end of the 

Ethernet network cable into the 

RJ-45 port of the hub, switch, 

or PC you wish to use to 

configure the Bridge.

E

Plug the supplied power 

adapter into the Power port on 

the back panel of the Bridge. 

Then plug the other end into 

an electrical outlet.

Connecting the Wireless-B

A

Setting up the Wireless-B

A

Insert the Setup CD-ROM into 

your PC’s CD-ROM drive. The 

Setup Utility should run 

automatically, and the 

Welcome screen should 

appear. If it does not appear, 

click the Start button and 

choose Run. In the field that 

appears, enter D:\setup.exe (if 

“D” is the letter of your CD-ROM 

drive).

B

Click Setup to begin the setup 

process.

C

Make sure the Bridge is 

correctly connected to your 

wired network. Click Next.

D

The screen displays a list of 

Wireless-B Ethernet Bridges on 

your network, along with their 

status information. Select the 

Bridge you are currently 

installing by clicking its name in 

the Selection box. Click Yes.

E

The Password screen will 

appear. In lowercase letters, 

enter admin in the Password 

field. Then click Enter.

• Wireless-B Ethernet Bridge
• Quick Installation Guide
• Setup CD-ROM
• User’s Guide on CD
• Detachable Antenna
• Power Adapter
• Network  Cable
• Registration Card

Ethernet Bridge for Setup

Ethernet Bridge

B

E

D

E

GHz

2.4

C