Lucent Technologies 5800 Series User Manual

1. If you have selected RFC 1483 as your WAN protocol, you will see 

a screen for selecting networking options, and for setting your IP 

routing configurations.

2. Choose either Bridging enabled or IP routing enabled. If you 

choose bridging, all traffic to remote computers that is not routed 

will be bridged. You also have the option to only bridge PPPoE 

(PPP over Ethernet) traffic.

3. If you have chosen to have IP routing enabled, you must now 

choose to obtain your IP configuration automatically from a DHCP 

server on the WAN, or to configure your IP routing manually. To 

configure IP routing manually, you must enter a unique IP address 

and subnet mask for your router.

4. As options, you can choose NAT enabled to activate NAT (Network 

Address Translation) and Block NetBIOS traffic.

5. If your Network Service Provider has not provided specifics for use 

in making these settings, choose IP Routing, Obtain configuration 

automatically from WAN, and NAT enabled.

6. Click on the Next button to continue Easy Setup.