Lucent Technologies 6000 User Manual

4-86

MAX 6000/3000 Network Configuration Guide

Configuring Individual WAN Connections
Configuring terminal-server connections

This example shows how to configure the password and make the Rlogin option available to 
dial-in users. 

Open Ethernet > Mod Config > TServ Options. 

Specify the terminal-server password. 

Passwd=tspasswd

Set the Telnet parameter to Yes.

Configure a multiline login prompt.

Ethernet

Mod Config

TServ Options

Login Prompt=Welcome to Ascend Remote Server\Enter your 

name:

Prompt Format=Yes

Enable the use of the Rlogin command in terminal mode:

Rlogin=Yes

Exit the profile and, at the exit prompt, select the exit and accept option.

When dial-in calls are directed immediately to a host, the MAX unit establishes a session 
between the remote user’s PC and that host via Rlogin, Telnet, or TCP. The following 
parameters in Ethernet > Mod Config > TServ Options affect the session the unit establishes:

To configure immediate Telnet service relying on the Telnet host for authentication:

Open Ethernet > Mod Config > TServ Options. 

Set the Immed Service parameter to Telnet.

Specify the name or IP address of the Telnet host.

If appropriate, specify the TCP port to use on the Telnet host.

Set the Telnet Host Auth parameter to Yes.

Immed Service

A particular type of service for establishing an immediate host 
connection for dial-in users. You can specify Telnet, Raw-TCP, 
Rlogin, or X25-PAD. For details about X.25, see Chapter 6, 
“Configuring X.25.”

Immed Host

The hostname or address to which users connect in terminal-server 
immediate mode.

Immed Port

A TCP port number to use for the connections.

Telnet Host Auth

Whether the MAX unit bypasses terminal-server authentication and 
goes right to a Telnet login prompt.