Lg Electronics N2B1 User Manual

2. LG Network Storage Installation

1

‘LG Network Storage Installer’ installation (LG Network 

Storage system file installation,volume and RAID 

configuration)

①  Connect the enclosed power adaptor to the DC jack. Plug the “power cord” into an 

electrical outlet.

 

 

Once the power adaptor is connected to the DC jack, connect the power cord to the 

outlet.

②  While holding down both ‘<-‘ and ‘->’ buttons, press the POWER button once. 

Once the “Enclosure_Mode” message pops up, let go of the arrow buttons. 

9

③  Once “Enclosure mode” is complete, the LG Network Storage will automatically 

reboot itself.  

In the case that the power shut down abnormally before the system successfully 

reached “Enclosure mode,” please return to step 2 and re-run “Enclosure mode.”