Magma EB2R User Manual

22               

Once the EB2 has been installed in a RedHat9-based system, its 
installation can be verified by typing the following command lines: 

lspci –t  Displays the overall structure of the PCIe expansion system 

lspci –vv  Lists additional information about the PCIe switch (in our 
case it will list the Integrated Device Technology (IDT) information. 

Ispci –vvv Displays the most comprehensive information about the 
expansion system.  

Below we’ve shown the output corresponding to the lscpi command: 

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory 
Controller Hub (rev 02) 

00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI 
Express Root Port (rev 02) 

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller (rev 01) 

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 1 (rev 01) 

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 3 (rev 01) 

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) 
USB UHCI #1 (rev 01) 

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) 
USB UHCI #2 (rev 01) 

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) 
USB UHCI #3 (rev 01) 

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) 
USB UHCI #4 (rev 01) 

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) 
USB2 EHCI Controller (rev 01) 

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)