Lantronix 900-422 User Manual
XPress DR+ User Guide
63
9: Setup Mode: Advanced Settings
Expert Settings (Option 5)
Note:
You can change these settings using Telnet or serial connections only, not
on the Web-Manager.
Caution:
Only an expert should change these parameters. You must
definitely know the consequences the changes might have.
Figure 9-1. Expert Settings
The default settings are listed below:
TCP Keepalive time in s
(1s – 65s; 0s=disable)
(1s – 65s; 0s=disable)
45
ARP Cache timeout in s
(1s – 600s)
(1s – 600s)
600
Disable Monitor Mode @
bootup
bootup
Enabled
HTTP Port Number
(1-65535)
(1-65535)
80
MTU Size (512 – 1400)
0 (resulting in an operational value of 1400)
Enable alternate MAC
Disabled (OEM use only)
TCP Keepalive time in seconds
This option allows you to change how many seconds the unit waits during a silent
connection before attempting to see if the currently connected network device is still on
the network. If the unit gets no response, it drops that connection.
connection before attempting to see if the currently connected network device is still on
the network. If the unit gets no response, it drops that connection.
TCP Keepalive time in s (1s – 65s; 0s=disable): (45)? _