Panasonic M1111TY0 -FJ User Manual

106

3. System settings

3-4. Setting the date and time

The user can set the date and time to be used as the memory
card’s time stamp.
Be absolutely sure to set them when an memory card is to be
used.

Setting the date

Press the

s button to light its indicator, and display the

System menu.

Use [F1] to display the Date sub menu.

Use [F2] to set the year using the Year item.

Use [F3] to set the month using the Month item.

Use [F4] to set the day using the Date item.

Press the [F5] to enter the year/month/day.

Setting the time

On the System menu, use [F1] to display the Time sub

menu.

Use [F2] to set the hour using the Hour item.

Use [F3] to set the minutes using the Minute item.

Use [F4] to set the seconds using the Second item.

Press the [F5] to enter the hour/minutes/seconds.

3-5. Network settings

Proceed with the network settings to perform such tasks as
updating the software version via LAN.
The network initial setup is: IP address: 192.168.0.8, subnet
mask: 255.255.255.0.
When using the host computer with settings matching the
initial setup, it is not necessary to setup via the menu.

For the setting to take effect, the system must be rebooted.
Turn the system’s power off and then back on.

Setting the IP address

Press the

s button to light its indicator, and display the

System menu.

Use [F1] to display the Network1 sub menu.

Use [F2] to [F5] to set the IP address, and press the

[F5] (Save) to enter the address.

Setting the subnet mask

On the System menu, use [F1] to display the Network2

sub menu.

Use [F2] to [F5] to set the subnet mask, and press the

[F5] (Save) to enter the mask.

Setting the gateway

On the System menu, use [F1] to display the Network3

sub menu.

Use [F2] to [F5] to set the gateway, and then press [F5]

(Save) to enter the setting.

Display the MAC address

On the System menu, use [F1] to display the Network4

sub menu.
The MAC address now appears.