Panasonic M1111TY0 -FJ User Manual
111
Settings
4. External interfaces
4-1. Setting the GPI I/O
The user can set the functions that are to be controlled from
the GPI ports and set whether to enable the control.
the GPI ports and set whether to enable the control.
Press the
s button to light its indicator, and display the
Config menu.
Use [F1] to display the GPI-In Setting sub menu (or
GPI-Out Setting sub menu).
Use [F2] to set “On” or “Off” for the control to be
exercised from the ports using the GPI-In Enable item
(or GPI-Out Enable item).
(or GPI-Out Enable item).
Use [F3] to set the AUX bus to be used to notify the tally
using the AUX Sel item.
Use [F1] to display GPI-In Port 1/2 sub menu and
GPI-In Port 2/2 sub menu (or GPI-Out Port 1/5 sub
menu to GPI-Out Port 5/5 sub menu).
menu to GPI-Out Port 5/5 sub menu).
Use [F2] to [F5] to allocate the functions to be assigned
to the respective pin numbers.
Refer to “Control using the GPI Input port” and
Refer to “Control using the GPI Input port” and
“Output from the GPI Output port”.
Settings for the GPI-In Enable (or GPI-Out Enable) item
can be assigned to one of the user buttons.
Refer to “3-3-1. Setting the user buttons”.