Panasonic M1111TY0 -FJ User Manual

28

Using DVE effects, this key enables the key signals that have 
been input to be moved, expanded or contracted. 
In order for the flying key to take effect, select “SQ2: 8” as the 
key transition. 
  Refer to “1-2-1. Selecting the wipe pattern”.

When the key transition is executed, the keys are combined 
by the key signals set using the flying key menu. 
(The transition effect is fixed at MIX.)
Since the flying key uses DVE effects, the image is delayed by 
one frame.

Press the 

k button to light its indicator, and display the 

Key menu.

Use [F1] to display the Flying Key sub menu.

Use [F2] to set the X coordinate of the key signal using 

the X-Pos item.

Use [F3] to set the Y coordinate of the key signal using 

the Y-Pos item.

Use [F4] to set the key signal change size (max. 400: 

400 %) using the Size item.

Key signal

When combined using 
the flying key

ABC

ABC

In order to add the edge of the key before the DVE effect, 
the thickness of the edge is also changed when the size is 
changed.

When “Full” is selected using the Type item in “1-3-1. 
Selecting the key type”, PinP combinations can be performed 
using the flying key.
(At this point in time, the Clip item and Gain item cannot be 
set on the Adjust sub menu.)

With the full key, the image on the full screen serves as the 
key source signal so an edge will not be added unless a 
further step is taken. 
To add an edge, mask the key signals so that the key source 
signals are made smaller than the entire screen.
  For details on masking, refer to “1-3-8. Masking the key 

signals”.

The relative positions of the images when key, PinP1 and 
PinP2 images are to be superimposed onto one another can 
be set.

Press the 

k button to light its indicator, and display the 

Key menu.

Use [F1] to display the Key Priority sub menu.

Use [F2] to [F4] to set the relative positions using the 

Low item, Middle item and High item.

This is used to set the image to be placed at 
the bottom.

This is used to set the image to be placed in 
the middle.

This is used to set the image to be placed at 
the top.

Low:
 Key

Middle:
 PinP1

High:
 PinP2