Panasonic M1111TY0 -FJ User Manual

31

Basic 

operations

While the PinP menu is selected, adjust the X and Y 
coordinates using the positioner in the positioner area, and 
adjust the size using the rotary encoder [Z]. Alternatively, the 
settings can be performed on the menus.

Press the 

p button to light its indicator, and display the 

PinP1 menu (or PinP2 menu).

Use [F1] to display the Position sub menu.

Either operate the positioner and the rotary encoder [Z] 

or use [F2], [F3] and [F4] to set the X and Y coordinates 
and the size using the X-Pos, Y-Pos and Size items.

When the system is set to the HD mode and an SD format 
image is to be used for the PinP material, the images can be 
combined in the dot by dot mode (actual-size images).
In this mode, the SD format image will not be up-converted so 
image deterioration can be prevented.



 When “100.00” has been selected as the Size item 

setting on the Position sub menu, the size used for the 
combination will be the same number of lines as the SD 
format image.

Press the 

i button to light its indicator, and display the 

Input menu.

Use [F2] to select the signals for inputting the PinP 

material using the Select item.

Use [F1] to display the FS sub menu.

Use [F3] to select “Dot by Dot” using the Mode item, and 

press the [F3] to enter the selection.

PinP material

PinP combined image