Panasonic M1111TY0 -FJ User Manual

42

This unit supports two sets of internal color signals.

The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), 
Sat (color saturation) and Lum (luminance) are set, and under 
the other the 8 preset colors (white, yellow, cyan, green, 
magenta, red, blue and black) are called. 
The Hue, Sat and Lum of the called colors can also be 
adjusted.

Press the 

b button to light its indicator, and display the 

Color Background menu.

Use [F1] to display the CBGD1 Main sub menu (or 

CBGD2 Main sub menu).

Use [F2], [F3] and [F4] to perform the color adjustments 

(Hue, Sat and Lum).

 To call the preset color
Use [F5] to select the preset color using the Load item, 
and press the [F5].

 

 When [F5] is pressed, what has been set so far is 

canceled and replaced with the preset color values.

 

 To save the values that were set before calling the preset 

color, refer to “1-10. Memory”.

The gradation effect for color backgrounds can be set.

Press the 

b button to light its indicator, and display the 

Color Background menu.

Use [F1] to display the CBGD1 Wash sub menu (or 

CBGD2 Wash sub menu).

Use [F2] to set the Wash (gradation) effect using the 

Wash item.

The gradation effect is added.

The gradation effect is not added.

Use [F3] to set the color of the Wash (gradation) effect 

using the Color item.

A dual-color gradation effect is added. 
(This results in a gradation of two colors, 
namely, the CBGD1 Main color and the 
CBGD1 Sub color.)

The rainbow color gradation effect is added.

When “Dual” has been selected, use [F1] to display the 

CBGD1 Sub sub menu (or CBGD2 Sub sub menu), and 
set the sub color.

Use [F2], [F3] and [F4] to adjust the colors (Hue, Sat 

and Lum).