Panasonic M1111TY0 -FJ User Manual

49

Basic 

operations

The video effects in the shot memory or event memory can 
be output to the program signals after checking them using 
the memory preview bus (MEM-PVW).

Press the 

e button to light its indicator, and display the 

Shot Memory menu (or Event Memory menu).

Use [F1] to display the MEM PVW sub menu.

Use [F2] to select “MEM-PVW” using the Mode item.

The video effects are output to the program 
signals.

The video effects are fi rst output to the 
memory preview bus (MEM-PVW) and then 
output to the program signals.

ヰㄖㄕㄑㄖㄕホ
チヮユヮノヱヷヸ

ヰㄖㄕㄑㄖㄕホ
チヱヨヮ

ヮㄐㄅㄆホ
チヮユヮノヱヷヸ

ヮㄐㄅㄆホ
チヱヨヮ

 

 The resolution of the images output from the memories 

is lower than normal.

Press the [SHOT MEM] or [EVENT MEM] button of the 

memory whose video effects are to be recalled to select 
the memory.
(Press the button of the memory with the video effects 
for preview playback.)
Depending on the operation performed last, the 
indicator of the [STORE] button, [RECALL] button, 
[DEL] button or [EDIT] button lights up.

Select the bus (BKGD, Key, PinP1 or PinP2) to be 

recalled from the memory.
From the Shot Memory menu (or Event Memory menu), 
select the Recall Select sub menu, and then select “On” 
or “Off”.
  Refer to “1-10-6. Selecting the buses whose settings 

are to be registered and or played back”.

When selecting materials using the crosspoint buttons 

on the operation panel instead of using the registered 
“Material selection” item materials, press the [XPT 
DSBL] button to light its indicator in red.
  Refer to“1-10-1. Memory registration and recall 

items”.

Press the [RECALL] button.

The [RECALL] button indicator lights up, and the 
number key in which the memory is registered lights in 
green.
The operations of other memory buttons — 
[EVENT MEM] (or [SHOT MEM]), [PLUGIN MEM1] and 
[PLUGIN MEM2] — no longer take effect.

Press the 

P button, and press the number key (1 to 

10) corresponding to the page number.

Press the number key (1 to 10) corresponding to the 

number for the preview playback memory.
The preview images are output to the memory preview 
bus (MEM-PVW).

 

 During preview playback, the number key 

corresponding to the memory number blinks in green.

 

 If there is a PAUSE event, preview playback pauses at 

that event, and the number key corresponding to the 
memory number blinks in amber.
Each time the number key corresponding to the 
memory number is pressed, preview playback or 
pause is selected alternately, and this selection is 
repeated.

 

 When preview playback is completed, the indicators of 

the number key corresponding to the memory number 
and [TAKE/ENTER] button light in amber.
If the number key corresponding to the memory 
number is now pressed again, preview playback 
resumes.